1959 Chevy Impala Lowrider
As part of a GM economy move the 1959 Chevrolet Impala was redesigned to share bodyshells with lower-end Buicks Oldsmobiles, and Pontiacs. Using a new X-frame chassis the roof line was 3 inches lower, bodies were 2 inches wider, the wheelbase was 1-1/2 inches longer, and curb weight increased. Flattened tailfins protruded outward, rather than upward. The taillights were a large "teardrop" design at each side, and two slim-wide, nonfunctional front air intake scoops were added just above the grille,
The Impala became a separate series, adding a four-door hardtop and four-door sedan to the two-door Sport Coupe and convertible and a five-door station wagon. Sport Coupes featured a shortened roof line and wrap-over back window. The standard engine was an I6, while the base V8 was the carryover 283 cu. in. (4.6 L), at 185 hp (138 kW). Optional were a 283 cu. in. with 290 hp (220 kW) and 348 cu in (5.7 L) V8 up to 335 hp (250 kW). Standard were front and rear armrests, an electric clock, dual sliding sun visors, and crank-operated front vent windows. A contoured hooded instrument panel held deep-set gauges. A six-way power seat was a new option, as was "Speedminder", which allowed the driver to set a needle at a specific speed, which triggered a buzzer when exceeded.
The 1960 Impala models reinstated three round taillights on each side, and a white band running along the rear fenders.
Seven versions of the 283-cu. in. and 348-cu in V8s were offered: the carbureted Turbo-Fire 283 cu. in. could have either 170 or 230 hp (130 or 170 kW). The 348 cu. in. was available in 250 to 320 hp (190 to 240 kW) with a 350 hp (260 kW) Special Super Turbo-Thrust with triple two-barrel carburetors, 11.25:1 compression ratio, and dual exhausts. Fuel injection was no longer an option on full-size Chevrolets. New to the options list was cruise control. Production was 490,000 units.
A lowrider or low rider is a customized car with a lowered body. These customized vehicles are generally individually painted with intricate, colorful designs, rolling on wire-spoke wheels with whitewall tires. Lowrider rims are generally smaller than the original wheels, ranging down to 13 inches (330 mm). They are also often fitted with hydraulic systems that allow height adjustable suspension, where the vehicle is raised or lowered at the owner's command. Given these specific characteristics, while a lowrider is always a lowered car, a lowered car is not always a lowrider. The term is used to describe a class of vehicle, not simply the height from ground to chassis.
#twoguysandaride #carsoftheday #CarReview #CarReviews #ClassicCar #ClassicCars #CarReview #CarReviewChannel #NewCars #carshow #Impala #Lowrider
Comments
Post a Comment